Wrapping it up.

The last big thing to do is the bottom fill and hot coat.  It's like doing the top.  I start by sanding the laps and any high spots.  Then I tape off the rails.

For the bottom it only takes about 12 oz. of resin to do a fill coat.  I apply that and let it level itself out for about 10 minutes.  Next I cure it.

After it's cured I sand the bottom and fins with 100 grit.  It takes about the same amount of resin for the hot coat.

This is how it looks after it's cured.  I still have a lot of wet sanding to do.

I'm happy with how the fins and board are turning out.  It's best to let the resin cure for a couple days before doing my wet sanding.

Thanks for your support.  Keep surfing.